Assa Abloy Besam SW100 Owner's Manual
  1. Manuals
  2. Brands
  3. Assa Abloy Manuals
  4. Door Opening System
  5. SW100
  6. Owner's manual

Assa Abloy Besam SW100 Owner's Manual

Low energy swing door operator
Hide thumbs Also See for Besam SW100:
Table of Contents

Advertisement

Quick Links

Besam Low Energy Swing Door Operator
SW100
Owners Manual
Complies with ANSI/BHMA A156.19 standard for Power Assist and Low Energy Power Operated Doors.
UL 325 Listed.
1003826-US-3.0 – Issue 2007-08-24
ASSA ABLOY, the global leader in door opening solutions

Advertisement

Table of Contents
loading

Related Manuals for Assa Abloy Besam SW100

Summary of Contents for Assa Abloy Besam SW100

  • Page 1 Besam Low Energy Swing Door Operator SW100 Owners Manual Complies with ANSI/BHMA A156.19 standard for Power Assist and Low Energy Power Operated Doors. UL 325 Listed. 1003826-US-3.0 – Issue 2007-08-24 ASSA ABLOY, the global leader in door opening solutions...
  • Page 2 © All rights in and to this material are the sole property of ASSA ABLOY Entrance Systems AB. Copying, scanning, alter- ations or modifications are expressly forbidden without the prior written consent of the applicable company within ASSA ABLOY Entrance Systems AB. Rights reserved for changes without prior notice.

  • Page 3: Table Of Contents

    Table of content Caution..............4 To our customers .

  • Page 4: Caution

    Caution Caution • Improperly adjusted doors can cause injury and equipment damage • Inspect door operation daily using safety checklist on page 7. • Have door adjusted by a qualified Besam service technician as described on page 5. • To avoid bodily injury, material damage and malfunction of the product, the instructions contained in this manual must be strictly observed.

  • Page 5: To Our Customers

    To our customers To our customers The purpose of this manual is to familiarize you with your low energy automatic door system. It is essential that you know the system and that you recognize the impor- tance of maintaining your door system in compliance with the industry standards for safety.

  • Page 6: How The Sw100 Works

    How the SW100 works How the SW100 works The low energy swing door operator SW100 uses a DC motor and a gear-reduction system to drive an arm system which opens the door. Closing power is provided by a motor and a clock spring. An electronic control unit uses a motor encoder and a microprocessor to control the door’s movement.

  • Page 7: Daily Safety Checklist

    Daily safety checklist Daily safety checklist These minimum safety checks should be made each day and after any loss of electri- cal power: 1. Activate the door. Door should open at a slow smooth pace (4 or more seconds), and stop without impact. 2.

  • Page 8: Service Schedule

    Service schedule Service schedule Although Besam’s automatic door equipment has earned a reputation of world-class quality and reliability, all mechanical devices need service...just like your automobile. Your authorized Besam distributor can offer you a Planned Maintenance Agreement on the equipment you have just purchased. This agreement means the distributor will make planned maintenance calls to inspect, clean lubricate, adjust, repair or replace worn components.

  • Page 9: Doors And Locks

    Doors and locks Doors and locks • Normally the doors and mechanical locks are manufactured by other suppliers. • Unlock all the mechanical locks before switching on the operator. Note that more than one lock may be fitted. Control switches The SW100 can be equipped with control switches to control the door operation.

  • Page 10: Troubleshooting

    Troubleshooting Troubleshooting Fault Possible reasons why Remedies/Explanations The door does not open Control switch is set to OFF Change the setting of both control switches (ON) - The motor does not start Main power is missing Check the main power switch Presence detection is activated Check that there are no objects in the detection zone...

  • Page 11: Part Identification

    Part identification Part identification Item No. Description 1003547 Back plate (shorty) 1003498 Transmission unit/operator 1003532 Control unit CU-ESD 1003554 EXU-SI (Kit to extend the security functions) – optional 1003557 EXU-SA (Kit to extend the safety functions) – optional 1700607 Mains contact 1003540 Door stop body 1003542...
  • Page 12 Besam US Inc., 1900 Airport Road, US-Monroe, NC 28110 Tel: +1 704 290 5520 Fax: +1 704 290 5555 marketing@besam-usa.com ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

Table of Contents