Arm Systems; Pushing Installation With Push-Arm - Assa Abloy Besam SW300 Installation And Service Manual

8

Arm systems

The installation process of arm systems is the same for Fire door installations, Basic installations
and Inverse installations.
8.1

Pushing installation with PUSH-arm

This arm system is delivered with drive arm, telescopic part and door fitting. It is used if the oper-
ator is installed on the wall on the opposite side of the door swing, and approved for fire door ap-
plication for A up to 300 mm.
Art. no:1007965BK, 1007965SI
Extension
345 mm extension
Art. no: 173005
230 mm extension
Art. no: 173004
Joint part
Art. no: 173191
None (Standard arm)
Extension L=345 mm
Extension L=230 mm + joint part
Extension L=345mm + 230 mm + joint part
1007913-EI-9.0
Frame depth
hinge
150 mm 150 mm
A = reveal
0-22 mm
22-137 mm
137-252 mm
252-367 mm
Issue 2014-10-28
8 Arm systems
A
120 mm
120 mm
21°
23