H.265 VANGUARD II Series
4.5.1.2 Disk Group
You can assign the HDDs to different groups. HDD groups allow you to balance recordings
across multiple hard drives. For example, you can record channels 1~4 to one hard drive and
5~8 to a second hard drive. This can reduce the amount of wear on the hard drives and may
extend the life of the hard drives.
Disk Group Type: Select a Disk Group type. The Disk Group Type has to be pre-configured on
the Disk page (please refer to 4.5.1.1 Disk).
Disk Group: Select a Record Disk Group. The Record Disk Group has to be pre-configured on
the Disk page (please refer to 4.5.1.1 Disk).
Record Channel: Select the desired channel(s). The recordings of the selected channels will
be recorded to the selected Disk Group.
Default: Click to apply the default setting.
Apply: Click to save the settings.
89