EverFocus H.265 VANGUARD II Series User Manual page 94

Overwrite: Select Auto to enable the overwrite function; Off to disable the overwrite
function. If Auto is selected, the system will overwrite the oldest files on the HDD when HDD
is full. If Off is selected, please check the HDD status regularly, to make sure the HDD is not
full. The 1/3/7/14/30/90 Days stands for the max. number of recording days. For example, if
3 days is selected, the system will only record for 3 days and then start the overwrite process,
which means, the system will always keep 3-day-recordings in the storage.
Format HDD: The first time use HDDs have to be formatted before you can use it. Select the
desired HDDs and then click the Format HDD button to format the selected HDDs. Note that
only the HDDs with "Unformat" status displayed in the State column are required to format
or the recording function will not work. WARNING: This will effectively ERASE the ENTIRE
hard disk!! Please backup the data from HDDs before formatting the HDDs.
Note:
1. Only the HDDs with "OK" in the State column can perform the recording function. If not,
format the HDDs before start using the recording function.
2. The "Free Time" on the HDD list indicates the remaining time for the HDD to record
based on the pre-setup resolution, streaming and fps.
Record on eSATA: If you have connected an external eSATA storage device to the DVR, you
can enable the eSATA backup storage function. Note that eSATA function only supports for
models with eSATA port.
Default: Click to apply the default setting.
Apply: Click to save the settings.
88
H.265 VANGUARD II Series