Table of Contents
Advertisement
2. Basic Installation
2.1 Rack Ear Installation
1. Remove the M3 (φ 6.8) screws on the sides of the DVR.
2. Screw the supplied Rack Ears onto the sides of the DVR with the screws.
2.2 Hard Disk Installation
You can install four 3.5" HDDs inside the DVR for recording videos. The maximum capacity of
each HDD is 8TB.
3. Make sure the DVR is power-off.
4. Unscrew the ten housing screws on the DVR, and remove the housing cover from the DVR.
5. Find the SATA cable inside the DVR, and connect the SATA cable to the SATA port on the HDD
(left image). Find the internal power cable, and connect the internal power cable to the HDD
(right image).
3
Advertisement
Table of Contents
