EverFocus H.265 VANGUARD II Series User Manual page 30

To perform the Go to Preset Point function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Select a preset number (1-255) by clicking on the No. input box.
3. Click the Go To button
4. You can also click the Go To button of a specific preset number on the Preset List to go
to the selected preset point.
To perform the Tour function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Click the Start Tour button, the PTZ camera will start cruising based on the pre-configured
preset points with the dwell time.
3. To stop the Tour function, click the Stop Tour button.
.
24
H.265 VANGUARD II Series