Live Channel Tool Bar - EverFocus H.265 VANGUARD II Series User Manual

3.5 Live Channel Tool Bar

You can left-click any channel on the Live View Window to bring up its Live Channel Tool Bar.
No
Name
1 Manual Record
2 Manual Snapshot
3 Quick Playback
4 PTZ
5 Zoom
6 Image Settings
7 Stream Switch
Add Customized
8
Tag
9 Audio
10 Manual Alarm
1 2 3 4 5
Description
Click the button to start manual recording. During the process of
manual recording, the icon will display in red. Click the button again to
stop manual recording.
Click to take a snapshot of the channel. You can then using the
Playback panel to playback the snapshot images. Please refer to
4.7.3.7 Snapshot. To configure the snapshot parameters or set up the
snapshot schedule, please refer to 4.2.3 Snapshot.
Click to playback the latest 5 minutes recording of this channel. Click X
to exit the Quick Playback mode. To configure the quick playback start
time, please refer to 4.8.1 Quick Playback.
Click to bring up the PTZ Control panel. Please refer to 3.5.2 PTZ
Control Panel for more details.
Click to start the digital zoom function. Please refer to 3.5.1 Digital
Zoom (PIP) for more details.
Click to bring up the Image Setting window. You can adjust the Hue,
Brightness, Contrast and Saturation for each channel individually.
This icon is only available for IP cameras. Click to switch between HD
and SD stream to be displayed on the live view channel. To adjust the
HD (main stream), SD (sub stream) configurations, please refer to
4.2.1.1 Main Stream and 4.2.1.2 Sub Stream.
You can add a tag of the selected time to this channel. Input a tag
name and then click Save. To search for the tags, go to Playback > Tag,
please refer to 4.7.3.5 Tag.
Click to turn on or turn off the audio, or adjust audio volume.
Click to manually trigger alarm output of the channel.
19
H.265 VANGUARD II Series
6 7 8 9 10