EverFocus H265 Series User Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. H.265 VANGUARD II Series
  6. User manual

EverFocus H265 Series User Manual

Value ip network camera
Hide thumbs Also See for H265 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Value IP Series Network Cameras
H265, SG and NV Series
User's Manual
Copyright © EverFocus Electronics Corp.
Release Date: June, 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H265 Series and is the answer not in the manual?

Questions and answers

Related Manuals for EverFocus H265 Series

Summary of Contents for EverFocus H265 Series

  • Page 1 Value IP Series Network Cameras H265, SG and NV Series User’s Manual Copyright © EverFocus Electronics Corp. Release Date: June, 2022...
  • Page 2 Copyright All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation. EverFocus 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist.,...
  • Page 3 - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment, not expressly approved by EverFocus or parties authorized by EverFocus could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:...
  • Page 4 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.

  • Page 5: Table Of Contents

    CONTENTS Introduction........................ 1 Getting Started......................2 Checking the Dynamic IP Address ....................2 Settings for Microsoft Internet Explorer ..................4 Connecting the Camera to the Network ..................5 Live View Window....................... 7 Playback ............................8 3.1.1 Playback Panel.......................9 3.1.2 Download........................10 Channel Setting ...........................
  • Page 6 3.8.4.1 Performing the P2P Fuction.................76 3.8.5 Local Setting ......................78 Color Setting ..........................79 3.10 PTZ Setting ..........................80 3.11 AI Alarm ............................81 3.12 Live View Function Icons......................82 Appendix A………………………………………………………………………………………………………………………………… 83 Enabling the Multicast Function ......................83 EverFocus Electronics Corp........................76...

  • Page 7: Introduction

    Supported EZN3850-NV 8-megapixel 2.8~12mm motorized Supported EZN3550-NV 5-megapixel 2.8~12mm motorized Supported For more information on the product specifications, please refer to the datasheet of each product. To download datasheet, please click Download on each Product page on EverFocus Website www.everfocus.com.tw...

  • Page 8: Getting Started

    You can look up the IP address of the IP camera using the IP Utility (IPU) program. Please download the IP Utility from EverFocus website (key word search: "IP Utility"). Please connect the IP camera on the same LAN of your computer.
  • Page 9 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3. To access the Live View window, double click the IP address in the IP Address column, the Password window will pop up. By default, the ID is admin and there is no password. Please input a password for the first-time login.

  • Page 10: Settings For Microsoft Internet Explorer

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Settings for Microsoft Internet Explorer If you have difficulties viewing live view or upgrading firmware, it is suggested to complete the following settings of your computer. 1. If your PC or laptop is running with Windows, it’s required to run the browser as administrator when first entering the camera live view.

  • Page 11: Connecting The Camera To The Network

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Connecting the Camera to the Network There are three methods to connect the IP camera to the network: Router or LAN Connection, One-to-One Connection and Direct High-Speed Connection. Router or LAN connection This is the most common connection in which the IP camera is connected to a router and allows multiple users on and off site to see the IP camera on a LAN / WAN (Internet).
  • Page 12 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Direct High-Speed Connection In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service Provider) in the camera’s configuration web pages.

  • Page 13: Live View Window

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Live View Window No. Name Description Live Click to display the Live View window. Playback Click to enter the Playback page. Please refer to 3.1 Playback. Channel Click to enter the Display setting page. Please refer to 3.2 Channel Setting. Record Click to enter the Record setting page.

  • Page 14: Playback

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Playback Click the Playback button on the top navigation bar. The Playback window displays. You can play back the recordings stored in the on-camera micro SD card. To start playing back: 1.

  • Page 15: Playback Panel

    Folder to open the folder to find the recording file. To change the manual record storage path or the file format, please refer to 3.8.5 Local Settings. You can use EverFocus Player or any player supporting the video format to Video Clips play back the recordings.

  • Page 16: Download

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Original Aspect Ratio Click to play back all the streams with original aspect ratio. Stretch Click to stretch all the streams on the Playback window. Click to display the Playback window in full screen mode. To exit full Full Screen screen mode, press the ESC button on the keyboard or double-click on the Time Span Buttons...

  • Page 17: Channel Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Channel Setting Click the Display button on the top navigation bar to enter the Channel Setting page. 3.2.1 Live You can configure the live display settings on this page. Name: Input a camera name. Alphabetic, numeric and Chinese characters are supported. Date Format: Select a date format.

  • Page 18: Image

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.2.2 Image You can configure the image settings on this page. Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images. • Auto: Select Auto for the camera to automatically switch to day or night mode. You can further set up a Delay Switch time (second) in the below field.
  • Page 19 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP White Balance: • Auto: Select for the camera to automatically adjust the white balance. • Manual: Select to adjust the Red, Green, Blue values yourself. Shutter: • Auto: Select for the camera to automatically adjust the Shutter. •...

  • Page 20: Privacy Mask

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.2.3 Privacy Mask You can configure the Privacy Mask settings on this page. The Privacy Mask can block out sensitive areas from view, covering the areas in both Live View and Recordings. This feature is useful when users don’t want the sensitive information visible.

  • Page 21: Roi

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.2.4 You can configure the ROI settings on this page. Bitrate: Select a stream type to be applied with the ROI bitrate. ROI ID: Up to 8 ROI areas can be configured for each stream type. Enable ROI: Select Enable to enable the configured ROI area(s).

  • Page 22: Record

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Record 3.3.1 Stream You can configure the below configurations to Main Stream, Sub Stream and Mobile Stream. Enable: This button is only for Mobile Stream. Switch the button to the right to enable the function. Resolution: Select a resolution.

  • Page 23: Record

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.3.2 Record 3.3.2.1 Record You can configure the record settings on this page. Please note that to enable the record function, a micro SD card has to be inserted to the IP camera in advance. Please also format the micro SD card for the first-time use (refer to 3.6.1 HDD).

  • Page 24: Record Schedule

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.3.2.2 Record Schedule After setting up the Record settings, you can configure the normal record schedule on this page. Move your mouse cursor over the schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with green color, which will be applied with normal recording function.

  • Page 25: Alarm Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Event Setting 3.4.1 Setup You can configure the alarm setup on this page. 3.4.1.1 Motion You can configure the motion settings here: Enable: Switch the button to the right to enable the Motion function. Sensitivity: Select a sensitivity for the motion detection.

  • Page 26: Sound Detection

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.4.1.2 Sound Detection You can configure the Sound Detection settings here:. Enable: Switch the button to the right to enable the Sound Detection function. And then configure the Sound Detection Schedule on the below schedule grids. Rise: Switch the button to the right to enable the Sound Rise function.

  • Page 27: Alarm

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.4.2 Alarm 3.4.2.1 Motion You can configure the Motion alarm settings here: Alarm Output: After enabling the Alarm, select a timeout duration for the alarm output. Post Recording: Select a post recording time when a motion event is triggered. Send Email: Switch the button to the right to enable the Email alert function.

  • Page 28: I/O

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.4.2.2 I/O You can configure the I/O alarm settings here: Alarm Type: Select an alarm type. Options include Normally-Open, Normally-Close and Off. Alarm Output: After enabling the Alarm, select a timeout duration for the alarm output. Post Recording: Select a post recording time when an I/O event is triggered.

  • Page 29: Sound Detection

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Click Refresh to refresh the page; click Save to save the settings. 3.4.2.3 Sound Detection You can configure the Sound Detection alarm settings here: Alarm Output: After enabling the Alarm, select a timeout duration for the alarm output. Post Recording: Select a post recording time when a sound detection event is triggered.
  • Page 30 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Click Refresh to refresh the page; click Save to save the settings.

  • Page 31: Setup

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1 Setup 3.5.1.1 Face This page can set up Face Detection functions. Note that for Face Detection function to work, a face-recognition-supported IP camera is required. When camera detects faces of moving people, the Face Recognition event will be triggered.
  • Page 32 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP of the human or object you want to detect. Detection Mode: Choose a Detection Mode. Rule Kind: Choose a Rule Kind. Detection Range: Select a Detection Range. Click Refresh to refresh the page; click Save to save the settings. To configure the Face settings (f ace-recognition-supported IP camera required): In the Setup field, click to set up the face settings.

  • Page 33: Pedestrian

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.2 Pedestrian On this page, you can set up Pedestrian functions. When camera detects faces of humans, vehicle, pedestrian and vehicle, the Pedestrian event will be triggered. You can configure some event actions like event recording, Email alert or pop-up full screen when an event is triggered.

  • Page 34: Perimeter Intrusion

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.3 Perimeter Intrusion On this page, you can set up Perimeter Intrusion. When camera detects intrusion of humans, vehicle, pedestrian and vehicle, the Perimeter Intrusion event will be triggered. You can configure some event actions like event recording, Email alert or pop-up full screen when an event is triggered.
  • Page 35 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Perimeter intrusion settings : In the Setup field, click to set up the perimeter intrusion settings. Please refer to [Perimeter Intrusion Settings ] above. To draw an area: a.

  • Page 36: Line-Crossing

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.4 Line-Crossing When objects (human, vehicle or pedestrian & vehicle) cross a pre-defined line, the Line Crossing Detection event will be triggered. You can configure some event actions like event recording, Email alert or pop-up full screen when an event is triggered.
  • Page 37 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Line-Crossing settings : In the Setup field, click to set up the line-crossing settings. Please refer to [Line-Crossing Settings ] above. To drawn an area : Use your mouse to click 2 points to draw a line. If you want to move the line to other position or re-draw the line, select the line by checking the red box on the upper-side of the line, the line will change to red color.

  • Page 38: Foreign / Missing Object

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.5 Foreign / Missing Object When camera detects foreign (unattended) or missing objects in a pre-defined area, the Foreign/Missing Object event will be triggered. You can configure some event actions like event recording, Email alert or pop-up full screen when an event is triggered.
  • Page 39 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Foreign / Missing Object settings : In the Setup field, click to set up the foreign / missing object settings. Please refer to [Foreign / Missing Object Settings ] above. To draw an area : a.

  • Page 40: Cc (Crossing Counting)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.6 CC (Crossing Counting) The IP camera will count the times when objects (motion, person or vehicle) cross a pre-defined line, and the Cross-Counting event will be triggered. You can configure some event actions like event recording, Email alert or pop-up full screen when an event is triggered.
  • Page 41 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Crossing Counting settings : In the Setup field, click to set up the crossing counting settings. Please refer to [Crossing Counting Settings ] above. To draw a line: Use your mouse to click 2 points to draw a line.

  • Page 42: Hm (Heat Map)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.7 HM (Heat Map) [Heat Map Settings ] : You can configure the Heat Map settings here. Enable: Enable or disable this function. Rule Number: Draw a rule area on the area map, and click to the next few rules, then you can draw rules on the area map.
  • Page 43 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Click the Save button to save the settings. You can click the Clear button to remove all the areas. To remove a certain area, select the area by checking the red box on the upper-left corner of the area, and then click the Delete button.
  • Page 44 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.8 CD (Crowd Density Detection) [Crowd Density Detection Settings ] : You can configure the Crowd Density Detection settings here. Enable: Enable or disable this function. Sensitive: The sensitivity of triggering video tempering detection can be set as 1-4. The larger the value is, the more sensitive the occlusion alarm is.
  • Page 45 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Crowd Density Detection settings : In the Setup field, click to set up the Crowd Density Detection settings. Please refer to Crowd Density Detection Settings ] above. To draw a line: Use your mouse to click 4 points to draw a rectangle shape.
  • Page 46 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.1.9 QD (Queue Length Detection) [Queue Length Detection Settings ] : You can configure the Queue Length Detection settings here. Enable: Enable or disable this function. Sensitive: The sensitivity of triggering video tempering detection can be set as 1-4. The larger the value is, the more sensitive the occlusion alarm is.
  • Page 47 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP To configure the Queue Length Detection settings: In the Setup field, click to set up the Queue Length Detection settings. Please refer to Queue Length Detection Settings] above. To draw a line: Use your mouse to click 4 points to draw a rectangle shape.

  • Page 48: Recognition

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.2 Recognition Facial recognition can help verify personal identity to accurately authenticate the users. For this function to work, you will have to edit the database and group the users in advance. Facial recognition can help verify personal identity to accurately authenticate the users.
  • Page 49 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Click the Additional Face Image field and then click Local Storage Device to add more. Click OK to save the modification.

  • Page 50: Alarm

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3 Alarm You can configure the Alarm settings on this page. 3.5.3.1 Face On this page, you can use to configure the Face detection alarm settings here. [ Face Alarm Settings ] Alarm Output: When trigger alarm, the external alarm device output alarm time, can selected time period is 5S,10S, 20S, 30S.

  • Page 51: Face Recognition)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.2 FR (Face Recognition) After setting up the Recognition function in 3.5.2, you can further setup the alarm settings using this page. To configure the Face Recognition alarm settings. Here we use Allow List for example : Switch the Enable button to the right to enable the function.

  • Page 52: Ad (Attribute Detection)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.3 AD (Attribute Detection) After setting up the Face Detection function, you can further set up the AD function. Attribute Detection can help verify personal identity more detail (with/without mask) to accurately authenticate the users. Alarm Type: There are three types of alarms include Close, No Mask, and Wear Mask.

  • Page 53: Pedestrian

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.4 Pedestrian You can configure the Pedestrian detection alarm settings here. Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S, 10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 54: Perimeter Intrusion

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.5 Perimeter Intrusion You can configure the Perimeter Intrusion alarm settings here. Alarm Output: When trigger alarm, the external alarm device output alarm time, can selected time period is 5S,10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 55: Line-Crossing

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.6 Line-Crossing You can configure the Line-Crossing alarm settings here. Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S,10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 56: Foreign / Missing Object

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.7 Foreign / Missing Object You can configure the Foreign/Missing Object alarm settings here. Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S,10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 57: Cc (Crossing Counting)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.8 CC (Crossing Counting) You can configure the Cross Counting alarm settings here. Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S,10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 58: Fa (Face Attendance)

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.9 FA (Face Attendance) You can configure the Face Attendance settings here. Enable: Enable or disable this function. Send Email: Set the time to send mail, the Email setup need to set in Remote Setting –Network-Email. ON DUTY: Set start time.
  • Page 59 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.10 CD (Crowd Density Detection) Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S, 10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.
  • Page 60 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.3.11 QD (Queue Length Detection) Alarm Output: when trigger alarm, the external alarm device output alarm time, can selected time period is 5S, 10S, 20S, 30S. Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.

  • Page 61: Statistics

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.4 Statistics You can view the statistic reports using this page. 3.5.4.1 Face Detection After setting up the Recognition function, you can view the statistic reports using this page. Select date and time. Select the desired groups.

  • Page 62: Human & Vehicle Detection

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.4.2 Human & Vehicle Detection After setting up the Recognition function, you can view the statistic reports using this page. Select date and time. Click the Intelligent button to select the desired functions. Click the Search button, the statistic charts will be displayed below.

  • Page 63: Cross Counting Statistics

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.4.3 Cross Counting Statistics After setting up the Cross Counting function, you can view the statistic reports using this page. Select a report type, detection type and statistical type. Select the date. Click the Search button, the statistic charts will be displayed below.

  • Page 64: Heat Map Statistics

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.5.4.4 Heat Map Statistics After setting up the Heat Map function, you can view the statistic reports using this page. Select the report type. Select date and time. Click the Search button, the statistic charts will be displayed below. There are two types of charts as below.

  • Page 65: Network Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Network Setting 3.6.1 General You can configure the network settings on this page. 3.6.1.1 General Configuring the general settings. DHCP: This setting lets the system use an automatically assigned (dynamic) IP address. This address can change under certain circumstances.

  • Page 66: Pppoe

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP DNS: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually, it’s enough to just enter the DNS1 server address. Main Stream: Select to enable main stream function and multicast address. Multicast Address: Fill in the multicast IP address.

  • Page 67: Snmp

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.1.3 SNMP You can configure the SNMP settings on this page. Select a SNMP version and input the configurations. Click the Save button to apply the settings. 3.6.1.4 Port Configuration You can adjust the port configurations.

  • Page 68: Email

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.2 Email You can configure the email settings on this page. Email: Switch the button to the right to enable the Email function. Encryption: Select an encryption if your Email server requires the SSL or TLS verification. Select Auto if you are not sure.

  • Page 69: Ftp

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.3 You can configure the FTP settings on this page. When an alarm is triggered, the IP Camera will send an instant snapshot image to the FTP. FTP Enable: Switch the button to the right to enable the function. Server: Input the FTP server IP.

  • Page 70: Rtsp

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.4 RTSP You can enable the RTSP function on this page. RTSP Enable: Switch the button to the right to enable the RTSP function. Anonymous Login: Switch the button to the right to enable this function. RTSP Syntax: rtsp://[IP Address]:[RTSP Port]/ch01/[A] * IP Address: IP address of the IP Camera...

  • Page 71: Ddns

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.5 DDNS You can configure the DDNS setting on this page. DDNS (Dynamic Domain Name System) is a service used to map a domain name to the dynamic IP address of a network device. You can set up the DDNS service for remote access to the IP Camera.

  • Page 72: Https

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.6.6 HTTPS You can configure the HTTPS settings on this page. Switch the HTTPS button to the right to enable the function. Input a port number if necessary (default 443). Select an HTTPS Type and then click the Save button.
  • Page 73 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP If you want to edit whitelist, select Whitelist from the Restricted Type drop-down box; if you want to edit blacklist, select Blacklist from the Restricted Type drop-down box. To add a single IP address to the list, click the Single Add button and input an IP address and then click OK, the IP address will be added.

  • Page 74: Device Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Device Setting 3.7.1 HDD You can configure the SD card storage on this page. After inserting a micro SD card to the card slot, the IP camera will automatically detect the capacity of the on-camera SD card. Overwrite: Select Auto to enable the overwrite function.

  • Page 75: Cloud Storage

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.7.3 Cloud Storage You can configure the Cloud settings (Dropbox cloud storage) on this page. After configuring the settings, the system will automatically send the snapshot images or recordings to the associated Dropbox when alarm events occur.

  • Page 76: System Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP System Setting 3.8.1 General You can configure the system general settings on this page. 3.8.1.1 Date and Time Configuring the date and time settings. Time Setting Mode: Select a time setting mode. Date Format: Select a format for the date.

  • Page 77: Daylight Saving Time

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.1.2 Daylight Saving Time Switch the button to the right to enable the DST function. Daylight Saving Time: Switch the button to the right to enable the function. Start Time: Select a start time for the DST to start. End Time: Select an end time for the DST to stop.

  • Page 78: User Account

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.2 User Account You can configure the user account settings on this page. Up to 7 user accounts (1 administrator and 6 users) can be configured. 1. You can configure the user name/password in editing window. 2.

  • Page 79: Maintain

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.3 Maintain You can configure the maintain settings here. 3.8.3.1 You can configure the log settings. Major Type: Select a major time. Start Time: Select a start time. End Time: Select an end time. Search: Click to generate log report.

  • Page 80: Load Default

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.3.2 Load Default You can load system default settings on this page. Select the desired items to be restored to factory default and then click Save. Restoring default settings will not delete recordings and snapshots saved to the on-camera SD card.

  • Page 81: Import And Export

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.3.4 Import and Export You can import or export system configurations on this page. Import File: Click the Browse button to browse the file and then click the Import button. Export Path: Click the Browse button to select a directory of your computer and then click the Export button.

  • Page 82: Info

    You can view system info on this page. 3.8.4.1 Performing the P2P Fuction 1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to Apple Store. After the installation process is complete, start eFVMS App. eFVMS by EverFocus EverFocus eFVMS 2.
  • Page 83 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3. Scan the IP camera’s QR code on the info page of the IP Camera Web interface. Input the IP camera password and Media Port 9988. Tap the Save button. 9988 4.

  • Page 84: Local Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.8.5 Local Setting You can configure the local storage path on this page. Record Path: Select a storage path for recordings. Download Path: Select a storage path for download recordings. Snapshot Path: Select a storage path for snapshot images.

  • Page 85: Color Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Color Setting You can adjust Hue, Brightness, Contrast, Saturation and Sharpness value using the Color Panel. Click the Default button to restore all the value to factory default. On the Live View window, click the Color button to display the Color Panel.

  • Page 86: Ptz Setting

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.10 PTZ Setting For motorized lens models, you can control the lens operation using the Lens Control panel. On the Live View window, click the PTZ Setting button to display the Lens Control Panel. You can click the PTZ Setting button again to hide the Lens Control Panel.

  • Page 87: Ai Alarm

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP 3.11 AI Alarm The pre-configured AI alarms will be displayed here. Click the icon to select your desired AI functions.

  • Page 88: Live View Function Icons

    Click Folder to open the folder to find the recording file. To change the storage path or the file format, please refer to 3.8.5 Local Settings. You can use EverFocus Player or any player supporting the video format to play Video Clips back the recordings.

  • Page 89: Enabling The Multicast Function

    Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Appendix A Enabling the Multicast Function The Multicast Function is a technique for one-to-many communication over an IP infrastructure in a network that is designed to share IP camera loading and reduce network bandwidth. Note that for this function to work, the router / switch must support multicast function.
  • Page 90 Value IPCam-SG Series – H265, 2MP / 5MP / 8MP Go to the setting page of the router/switch to enable the Multicast function. Here we use a D-Link DIR655 router and EverFocus 24-port switch for example. The Multicast function setup is now complete.

  • Page 91: Everfocus Electronics Corp

    FAX: +81 3 5820-1018 www.everfocus.com www.everfocus.co.jp sales@everfocus.com sales@everfocus.co.jp Ihr EverFocus Produkt wurde entwickelt Your EverFocus product is designed and und hergestellt mit qualitativ manufactured with high quality materials hochwertigen Materialien und and components which can be recycled Komponenten, die recycelt und wieder and reused.

This manual is also suitable for:

Sg seriesNv seriesEbn1240-sgEbn1540-sgEbn2240-sgEbn2540-sg ... Show all

Table of Contents