Getting Started - EverFocus H.265 VANGUARD II Series User Manual

H.265 VANGUARD II Series
Chapter
3

3. Getting Started

After pressing the power switch to turn on the DVR, the DVR will enter the System Initialization
process. When the process is done, it's required to set up a password for the administrator
account immediately in order to protect your privacy.
Language: Select an OSD language.
Device ID: Input the device ID. The default ID is 000000. For more details about the Device ID,
please refer to 4.9.1.1 General.
New Admin name: Optionally input a name if you want to set up a name of the administrator
account.
Password Strength: Displays the security strength of the setup password.
New Admin Password: Set up a password of the administrator account. The password must be a
combination of at least 8 characters (alphabetic, numeric, or special characters).
Confirm Password: Enter the password again.
Enable Unlock Pattern: If you want to login the system with a pattern lock, select Enable from the
drop-down list and then click the Draw button to draw a pattern. To disable the Unlock Pattern
function, please refer to User Edit in 4.9.2 User Account.
Apply: Click to save the settings.
5