Live - EverFocus H.265 VANGUARD II Series User Manual

4.1.2

Live

You can configure camera OSD or image settings on this page.
Channel: Displays the channel number.
Setup: Click to enter the OSD and image setup page. You can use the left-side panel to
adjust the parameters. After configuring the settings, click Apply to apply the settings.
50Hz
Signal Format
Covert: Select to covert the camera stream on the live view. The channel will be black-out on
the Live Window, however, the system will still record the streams.
Channel Name: Optionally input a channel name.
Show Name: Check the box to display the channel name on the live channel.
Select a channel
Optional input a channel name
IP cameras only. Select a date format.
IP cameras only. Select a time format.
IP cameras only. Select a video signal type.
Analog cameras only. Select a camera type (Auto, AHD, TVI, CVI).
Select to covert the camera stream on the live view. The channel
will be black-out on the Live Window, however, the system will
still record the streams.
Select to display channel name or time on the live channel
Image Setting:
Adjust Hue, Brightness, Contrast, Saturation for the camera
Click to restore the Image Setting parameters to default value
Default: Click to restore all value above to default value.
Apply: Click to apply all value to the camera.
32
H.265 VANGUARD II Series