EverFocus H.265 VANGUARD II Series User Manual page 14

【Local Connection】
DHCP: For DHCP users, check DHCP, the router will automatically assign all the below IP
parameters to the DVR.
IP Address: The IP address of the DVR. The IP address consists of four groups of numbers,
separated by periods. For example, "192.168.001.100".
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that
can be used on a network. The subnet address also consists of four groups of numbers,
separated by periods. For example, "255.255.000.000".
Gateway: This address allows the DVR to access the Internet. The format of the Gateway
address is the same as the IP Address. For example, "192.168.001.001".
IPV6-IP Address: The IPV6 address of the DVR.
IPV6-Gateway: This address allows the DVR to access the Internet.
【DNS】
DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually, it's enough to just
enter the DNS1 server address.
【Port】
Web Port: The Web port can be used to remotely login the DVR (e.g. using the Web Client). If
the default port 80 is already taken by other applications, please change it.
Client Port: The Client port can be used to send information through (e.g. using the mobile
app). If the default port 9000 is already taken by other applications, please change it.
RTSP Port: The RTSP port allows the DVR to transmit real-time streaming to other devices (e.g.
using a streaming media player).
HTTPS: The Hypertext Transfer Protocol Secure (HTTPS) is a combination of the Hypertext
Transfer Protocol and the SSL/TLS protocol that provides encrypted communication and secure
identification of a network web server.
【PPPoE】
PPPoE is an advanced protocol that allows the DVR to connect to the network via a DSL
modem. To enable the PPPoE function, check Enable PPPoE, input the User Name and
Password provided by your Internet Service Provider.
8
H.265 VANGUARD II Series