Turning On / Off The Power - EverFocus H.265 VANGUARD II Series User Manual

After clicking the Apply button, the below Unlock page appears. Input the User Name, Password
and then click Unlock.

3.1 Turning On / Off the Power

Before powering on the DVR, please make sure the internal HDDs have been installed properly.
Once you have completed the basic cable connections, you are ready to turn on the DVR. Simply
plug in the power source and then press the Power Switch on the rear panel of the DVR to turn
on the DVR. The POWER LED will light up if power is normal. Once the system has finished
loading, you can start setting up the menu options for the DVR.
To turn off the power, please refer to Shutdown in 4.10 Exit for more details.
6
H.265 VANGUARD II Series