Record - EverFocus H.265 VANGUARD II Series User Manual

4.2.2

Record

On this page, you can configure the recording parameters and recording schedule for each
channel.
4.2.2.1 Record
Channel: Displays channel number.
Enable Channel: Check the box to enable the function of the channel.
Record Stream: Select a recording stream for the channel. If you select Dual Streams, the
system will record both Main Stream and Sub Stream. If you select Main Stream, the system
will only record Main Stream.
Pre-Record: Check the box to enable the pre-record function. The DVR will start recording a
few seconds before an alarm/event is triggered.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field
and then click the Copy button.
Default: Click to apply the default setting.
Apply: Click to save the settings.
63
H.265 VANGUARD II Series