Load Default; Upgrade - EverFocus H.265 VANGUARD II Series User Manual

4.9.3.2 Load Default

Select the desired items to be restored to factory default and then click Apply. Restoring
default settings will not delete recordings and snapshots saved to the hard drive.

4.9.3.3 Upgrade

You can upgrade system firmware using this page.
1. Restore the firmware file (.sw) in a USB storage device and insert the USB storage device
to the DVR.
2. Click the Select File button to select the firmware file from the USB storage device.
3. Click the Upgrade button to start system upgrade.
Note: Do not take out the USB storage device or turn off the power during system
upgrading. When the upgrade is done, the system will restart automatically.
128
H.265 VANGUARD II Series