System; General - EverFocus H.265 VANGUARD II Series User Manual

4.9 System

You can configure most of the system settings on the Main Menu.
4.9.1

General

4.9.1.1 General
You can configure the general system settings on this page.
Device Name: Input a desired name for your DVR. The name can include both letters and
numbers.
Device ID: Enter the desired ID for your DVR. The device ID is used to identify the DVR, and
can only be composed of numbers. For example, 2pcs DVRs are installed in the same place,
the Device ID is 000000 for one of the DVRs, and 111111 for another DVR. When you want
to operate the DVR with a remote controller, both of the DVR may receive the signal from
controller & act at the same time. If you want to control only the DVR with ID 111111, you
can input the Device ID 111111 in login page with remote controller for further operations.
Language: Select a language.
Video Format: Select NTSC or PAL for the system.
Menu Timeout: Select a timeout time for the OSD menu to automatically exit. Select Off for
the OSD menu to display continuously.
Mode: Select DVR if you only want to connect FHD cameras to the DVR; or select HVR if you
want to connect both of the FHD cameras and IP cameras to the DVR.
Show Wizard: Check the box to enable starting the Startup Wizard every time when system
starts.
Default: Click to apply the default setting.
Apply: Click to save the settings.
119
H.265 VANGUARD II Series