Device; Disk - EverFocus H.265 VANGUARD II Series User Manual

4.5 Device

You can configure the internal HDD and Cloud storage function on this page.
4.5.1

Disk

4.5.1.1 Disk
You can configure the HDD settings on this page. Please connect the HDD(s) to the DVR in
advance and ensure the power and SATA cables are properly connected between the DVR
and HDD(s). After connecting the HDD(s) to the DVR, the DVR will automatically detect the
connected HDD(s) and listed all the connected HDD(s) in the below field.
For the first time connected HDDs, the status will show "Unformat" in the state column,
users will have to format the HDDs before you can use it.
The HDD(s) marked with * in the No. column indicates the HDD(s) is/are being used at
present.
Edit: Click the Edit button and the below window appears. You can assign each HDD to
different Disk Type (Read/Write, Read only or Redundancy) and Disk Group (Group 1 ~ 16).
A Redundant HDD can be used to automatically backup video footage on the recording
(read-write) hard drive. When a redundant HDD is set, the system can be set to record
cameras in parallel to both the recording hard drive and the redundant hard drive in case of
hard drive failure.
Checkbox: You can select the HDDs in the No column to select the HDD(s), and then you can
set up the Overwrite or eSATA function, or Format the HDD. Note that eSATA function only
supports for models with eSATA port.
87
H.265 VANGUARD II Series