Configuring Face Detection Area - EverFocus H.265 VANGUARD II Series User Manual

4.1.8.5.1 Configuring Face Detection Area

Click the Setup button
Channel: Select a channel to configure the settings.
Snapshot Mode: Select a Snapshot Mode.
Realtime: System will take two snapshot images. One is when alarm triggered. The other

will be an optimal image that system recognized.
Optimal: System will take one snapshot images that is recognized as the optimal one.

Interval: Select this mode to further set up the Snapshot Quantity and Snapshot Interval.

- Snapshot Quantity: Select the number of snapshot image to take per set up interval.
- Snapshot Interval: Set up an interval to take the snapshot images.
Snapshot Number: Select a recognition mode.
Custom Mode: Select this mode to take the frontal face image only. To view the default

parameters, select Customize and then click the Custom Mode Default button.
Min Pixel: Select this mode to apply the minimum parameters of the orientation angles

(Roll, Pitch, Yaw) of the faces toward camera, Picture Quality and Quick Mode. To view
the default parameters, select Customize and then click the Min Pixel Default button.
Customize: Select this mode and then apply the orientation angles (Roll, Pitch, Yaw) of

the faces toward camera, Picture Quality and Quick Mode.
- Roll Range: Adjust the rotation angle (0-180).
- Pitch Range: Adjust the horizontal angle (0-180).
- Yaw Range: Adjust the vertical angle (0-180).
- Picture Quality: Adjust the quality of the face snapshot images. The more the value,
the better the image quality.
- Custom Mode Default: Click to display the default parameters of the Custom Mode.
- Min Pixel Default: Click to display the default parameters of the Min Pixel.
Quick Mode: Set up the maximum recognition pixel size within a 1080p image.
Face Enhance: You can select enable or disable for Face Enhance function.
Detection Mode: Select Static Mode or Motion Mode.
Rule Type: Select Line or Area.
to enter the Area setup page.
50
H.265 VANGUARD II Series