H.265 VANGUARD 4x2H / 8x4H / 16x8H
4.5.1.2 Disk Group
You can configure the HDD to be different groups. HDD groups allow you to balance
recordings across multiple hard drives. For example, you can record channels 1~4 to one
hard drive and 5~8 to a second hard drive. This can reduce the amount of wear on the hard
drives and may extend the life of the hard drives.
Disk Group Type: Select a Disk Group type. The Disk Group Type has to be pre-configured on
the Disk page (please refer to 4.5.1.1 Disk).
Disk Group: Select a Record Disk Group. The Record Disk Group has to be pre-configured on
the Disk page (please refer to 4.5.1.1 Disk).
Record Channel: Select the desired channel(s). The recordings of the selected channels will
be recorded to the selected Disk Group.
Default: Click to apply the default setting.
Apply: Click to save the settings.
118