Channel; Analog Channels - EverFocus H.265 VANGUARD II Series User Manual

4.1 Channel

In this section, you are allowed to configure the settings including analog cameras, IP cameras,
live view display, PTZ setup, motion setup and more.
4.1.1 Channel

4.1.1.1 Analog Channels

This page is only available for 4CH and 8CH models. If you want to add more IP cameras to
the DVR, you can disable the analog cameras in order to release more channels for adding IP
cameras. For this function to work, you will have to enable the HVR mode for the DVR in
advance (OSD > System > General). Disable one analog channel can release one channel for
adding IP camera.
27
H.265 VANGUARD II Series