EverFocus H.265 VANGUARD II Series User Manual page 152

On the PTZ Panel, click PTZ Model to display the Preset/Tour Control panel.
On the PTZ Panel, click Coaxial to display the UTC Control panel. You can use this panel to
display the analog camera OSD menu and configure the camera OSD settings.
Note: For EverFocus' PTZ cameras, only the UTC-supported PTZ cameras support the UTC
function.
To set up Preset Points:
1. Select a PTZ camera by clicking on it on the Live View window.
2. Use the direction buttons or Zoom/Focus/Iris buttons to search for
a preferred location.
3. Click the + button to add this location as a preset point, the preset
point should be added on the list below.
4. Follow Step 2-3 to set up multiple preset points.
5. To go to a preset point, click the
point, click the
To perform the Tour function:
1. Set up the preset points in advance. Select an interval time for
each preset points.
2. Click the Start Tour button
cruising based on the preset points with the dwell time.
3. To stop the Tour function, click the Stop Tour button
146
H.265 VANGUARD II Series
button; to delete a preset
button.
, the PTZ camera will start
1. Select a camera and then
select UTC1 or UTC2 from
the Coaxial drop-down list.
2. Click the
camera OSD menu will be
displayed.
3. Use the Up / Down / Left /
Right buttons to select
among the OSD menu items
and use
button to enter the setup
menu.
.
button, the
as the Enter