Table of Contents
Advertisement
MoniVue System – Video Recorder
2.3.3
Monitor Connection
The video recorder has one Main Monitor port (VGA) and 1 Call Monitor port (BNC). You can
connect the monitors to the system through VGA and BNC ports. The Main and Call Monitor
ports can be used simultaneously. Make sure that the connected monitor's specifications comply
with these resolution requirements.
Main Monitor: The configuration can only be operated on the Main Monitor.
Call Monitor: The call monitor can display camera streams or perform sequence mode.
Video Output
Main Monitor (VGA)
Call Monitor (BNC)
D-Sub Cable
2.4 Turning On / Off the Power
Once you have completed the basic cable connections, you are ready to turn on the system.
Simply plug in the power source. The POWER LED will light up if power is normal. Once the
system has finished loading, you can begin to set up the menu options for the system.
To turn off the power, please go to OSD Root Menu > System > System Setting >
Miscellaneous setting page, and click Shutdown (refer to 6.9.7 Miscellaneous in the User's
Manual). After the message pops up as below, you can now turn off the power source.
11
Advertisement
Table of Contents
