Table of Contents
Advertisement
CLI error messages
The following error messages may be returned by the Command line Interface
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID Member index
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR
Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command
Line Interface commands, their defaults, and an
example of how to enter the commands.
CAUTION
CAUTION
Do not use CLI unless you are directed to by an ATTO technician.
Changing parameters may cause loss of data and/or disruption to performance and reliability of
the iPBridge.
The ExpressNAV interface is the preferred method to operate and manage the iPBridge. Refer to
Using ExpressNAV
Command
AccessControl
AccessEntry
AutoMap
BridgeModel
BridgeName
ClearEventLog
ClearTraceLog
Date
DeleteAllMaps
DisplayEventLog
DisplayEventLogFilter
DisplayTraceLog
DisplayTraceLogFilter
DPMTU
DumpConfiguration
DumpEventLog
DumpTraceLog
EmailFromAddress
on page 27 for details.
Default
disabled for default node
enabled for all other nodes
iPBridge
all all all
all all all
1514
Commands which have no default values have a
blank entry in that column of the table.
Example
set accesscontrol default enabled
get accessentry default all delete
automap
get bridgemodel
set bridgename Omega6
cleareventlog
cleartracelog
set date 03/03/2005
deleteallmaps
displayeventlog
set displayeventlogfilter gen info all
displaytracelog
set displaytracelogfilter all all chkcond
set dpmtu all 9014
dumpconfiguration
dumpeventlog
dumptracelog
set emailfromaddress notify1@attotech.com
ii
Advertisement
Table of Contents
