Cli Error Messages - ATTO Technology iPBridge 1550D Installation And Operation Manual

CLI error messages

The following error messages may be returned by the Command line Interface
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
CLI summary
The following chart summarizes the Command
Line Interface commands, their defaults, and an
example of how to enter the commands.
CAUTION CAUTION
Do not use CLI unless you are directed to by an ATTO technician.
Changing parameters may cause loss of data and/or disruption to performance and reliability of
the iPBridge.
The ExpressNAV interface is the preferred method to operate and manage the iPBridge. Refer to
Interface options
Command
AccessControl
AccessEntry
AutoMap
AutoMapOnBoot
AutoMapOnBootDelay
BridgeModel
BridgeName
ClearEventLog
Date
DeleteAllMaps
DPMTU
DumpConfiguration
DumpEventLog
EthernetSpeed
Exit
FirmwareRestart
Help
IdentifyBridge
Info
IPAddress
IPDHCP
IPGateway
IPSubnetMask
iSCSIAlias
iSCSIChap
on page 23 for details.
Default
disabled for default node
enabled for all other nodes
enabled
0
iPBridge
1514
auto
disabled
10.0.0.1
enabled
0.0.0.0
255.255.0.0
" "
disabled
Commands which have no default values have a
blank entry in that column of the table.
Example
set accesscontrol default enabled
set accessentry discovery all delete
automap
set automaponboot disabled
set automaponbootdelay 20
get bridgemodel
set bridgename Omega6
cleareventlog
set date 03/03/2003
deleteallmaps
set dpmtu 9014
dumpconfiguration
dumpeventlog
set ethernetspeed dp1 100
exit
firmwarerestart
help automap
set identifyBridge enabled
info
get ipaddress dp1
set ipdhcp dp1 disabled
get ipgateway dp1
get ipsubnetmask dp1
set iscsialias diamond
set iscsichap default enabled
iv