Cli Error Messages; Cli Summary Reference - ATTO Technology FibreBridge 2370E Installation And Operation Manual

CLI error messages

The following error messages may be returned by the Command line Interface
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR. Command Not Processed

CLI summary reference

A summary of the Command Line Interface commands, their defaults, and where you can find the specific
command. Commands which have no default values associated with them have a blank entry in that column of
the table.
Command
AutoLogSense
AutoMap
BootFibreDelay
BootScan
BootScanPorts (FB 2400)
BridgeModel
BridgeName
ClearEventLog
ClearTraceLog
Date
DeleteAllMaps
DisplayEventLog
DisplayEventLogFilter
DisplayTraceLog
DisplayTraceLogFilter
DumpConfiguration
DumpEventLog
DumpTraceLog
EmailFromAddress
EmailNotify
EmailNotifyAddress
EmailPassword
EmailServerAddress
EmailUsername
EthernetSpeed
EventLog
EventLogFilter
iii
ATTO Technology Inc. FibreBridge Installation and Operation Manual
Default Example
disabled set autologsense enabled
automap
0 set bootfibredelay 15
disabled set bootscan enabled
auto set bootscanports all
get bridgemodel
" " set bridgename Omega6
cleareventlog
cleartracelog
set date 03/03/03
deleteallmaps
displayeventlog
all all all set displayeventlogfilter all all all
displaytracelog
all all all set displaytracelogfilter all info all
dumpconfiguration
dumpeventlog
dumptracelog
get emailfromaddress
disabled get emailnotify
set emailnotifyaddress 5 bw@abc.com
set emailpassword
0.0.0.0 get emailsesrveraddress
set emailusername beta321
auto set ethernetspeed 100
enabled set eventlog disabled
all all all set eventlogfilter gen info enabled