Remote Controller Service Mode - Panasonic Urban Multi MX1R Series Service Manual

Troubleshooting by Remote Controller
2.5

Remote Controller Service Mode

How to Enter the
Service Mode
Service Mode
1. Select the mode No.
Operation Method
Set the desired mode No. with the
(For wireless remote controller, Mode 43 only can be set.)
2. Select the unit No. (For group control only)
Select the indoor unit No. to be set with the time mode
button.)
3. Make the settings required for each mode. (Modes 41, 44, 45)
In case of Mode 44, 45, push the timer
(LCD "code" blinks.)
For details, refer to the table in next page.
4. Define the setting contents. (Modes 44, 45)
Define by pushing the timer
After defining, LCD "code" changes blinking to ON.
5. Return to the normal operation mode.
Push the
494
button.
button.
button one time.
Troubleshooting UM Combination "MA1R Series" Using R-407C
. (For wireless remote controller,
button to be able to change setting before setting work.
PACD011001C2