Panasonic Urban Multi MX1R Series Service Manual page 479

Test Operation
Mode Changing Procedure
Press the MODE button.
Monitor mode
Select check items with
the operation button.
Contents displayed
Note: 1. If you become unsure of how to proceed, push the MODE button (BS1) and return to setting mode 1.
2. Power reset is not necessary after setting of setting mode 1 (including C/H select SS1) and setting
458
Select cool/heat run
Set
with the operation button.
Press the
RETURN button.
Select low-noise run with
the operation button.
Press the
RETURN button.
Select sequential start
with the operation button.
Press the MODE
button.
mode 2.
Set
: Use the SET button to make settings.
Hold down the MODE
Setting mode 1
button for 5 seconds.
(initial status)
Press the
SET button.
Set
Note. 1
Press the
RETURN button.
Set
Press the
RETURN button.
Set
Press the
RETURN button.
Test Operation UM Combination "MA1R Series" Using R-407C
PACD011001C2
Setting mode 2
Select items with the
Set
operation button.
Press the
RETURN button.
Select setting items
Set
with the operation button.
Press the
RETURN button.
Contents displayed
Press the
RETURN button.
Press the
MODE button.
(VF131)