Panasonic Urban Multi MX1R Series Service Manual page 340

PACD011001C2
„ Group No. setting by wireless remote controller for centralized control
CZ-01·02RW Type
1. When in the normal mode, push the
2. Set mode No. "00" with the
3. Set the group No. for each group with the
4. Enter the selected group numbers by pushing the
5. Push the
Group No. Setting
Example
„ If you have to set the address for each unit for calculating cost, etc., set the mode No. to "30."
Test Operation Urban Multi "MX1R, ME1R Series" Using R-407C
the "field set mode."
button and return to the normal mode.
button for 4 seconds or more, and operation then enters
button.
button (advance/backward).
button.
Test Operation
319