Panasonic Urban Multi MX1R Series Service Manual page 499

Test Operation
Group No. Setting
Example
Indoor/Outdoor Outdoor/Outdoor
F1 F2
„ If you have to set the address for each unit for calculating cost, etc., set the mode No. to "30."
When turning the power supply on, the unit may often not accept any operation while "88" is displaying
Caution
after all indications were displayed once for about 1 minute on the liquid crystal display.
This is not an operative fault.
478
F1 F2
F1 F2 P1 P2 F1 F2 P1 P2
RC
Main
1-00
F1 F2 P1 P2 F1 F2 P1 P2
No Remote Controller
1-03
Indoor/Outdoor Outdoor/Outdoor
F1 F2 F1 F2
F1 F2 P1 P2
RC RC RC
Sub
1-02
1-01
F1 F2 P1 P2
RC
1-04
Test Operation UM Combination "MA1R Series" Using R-407C
PACD011001C2
Centoral Remote
Controller
F1 F2
F1 F2 P1 P2
Group Control by Remote Contoller
(autmatic unit address)
F1 F2 P1 P2
(V0917)