Panasonic Urban Multi MX1R Series Service Manual page 27

Using r-407c / r-22
Table of Contents

Advertisement

Outline of System
UM Inverter MX1
Series
1.2.2
Changes in Indoor Units
Drain Pump
When the TEST OPERATION button has been pushed in order to facilitate checking drainage when
installing, the drain pump is force-operated regardless of the temperature control mode. If a humidifier is to
be included in the setup, you must set to "Equipped humidifier" with the remote controller. (With the factory
settings, the drain pump is not operated during heating.)
Swing Louver
The wall mounted type is equipped with a swing louver. The ceiling mounted cassette type can be set to
prevent the ceiling from being soiled.
Able to Use
The multi flow, double flow, ceiling suspended and wall mounted types can be fitted with a wireless remote
Wireless Remote
controller kit.
Controllers
(Other types can use a separate wireless remote controller.)
1.2.3
Changes in Outdoor Units
Equipped with Oil
Oil temperature detection has been incorporated into control in order to prevent wet operation and improve
Temperature
dilution of oil.
Sensor Thermistor
(8 and 10HP)
6
Outdoor unit
Indoor
Outdoor
-outdoor
-outdoor
F1 F2 F1 F2
F1 F2 F1 F2
Indoor unit
N
N
P
F1 F2
N
P
Indoor
Outdoor
-outdoor
-outdoor
F1 F2
F1 F2
P
F1 F2
N
P
F1 F2
Individual remote controller
F1 F2
N
P
F1 F2
General Information Urban Multi "MX1, ME1 Series" Using R-22
PACD011001C2
Indoor
Outdoor
-outdoor
-outdoor
F1 F2 F1 F2
To other outdoor unit
To indoor unit
N
P
F1 F2
N
P
F1 F2
Central remote controller
(VL002)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents