Indoor Field Setting - Panasonic Urban Multi MX1R Series Service Manual

Test Operation
1.15

Indoor Field Setting

Making a field setting
Field settings must be made by remote controller if optional accessories have been installed on the indoor
unit, or if the indoor unit or HRV unit's individual functions have been modified.
1.15.1 Wired Remote Controller <CZ-01RT Type>
1. When in the normal mode, push the
2. Select the desired "mode No." with the
3. During group control and you want to set by each individual indoor unit (when mode No. 20, 21, 22, 23,
4. Push the
5. Push the
6. Push the timer
7. Push the
1.15.2 Wireless Remote Controller <CZ-01·02RW Type>
1. When in the normal mode, push the
2. Select the desired "mode No." with the
3. Pushing the
4. Pushing the
5. Push the
6. Push the
Notes: 1. Settings are made simultaneously for the entire group, however, if you select the mode No. inside
316
the "field set mode."
25 has been selected), push the time mode
Note: This operation is not required when setting as a group.
button and select the first code No.
button and select the second code No.
button one time and "define" the currently set contents.
button to return to the normal mode.
the "field set mode."
button, select the first code No.
button, select the second code No.
button and check the settings.
button to return to the normal mode.
parentheses, you can also set by each individual unit. Setting changes however cannot be checked
except in the individual mode for those in parentheses.
button for 4 seconds or more, and operation then enters
button.
button and select the "indoor unit No." to be set.
button for 4 seconds or more, and operation then enters
button.
Test Operation Urban Multi "MX1R, ME1R Series" Using R-407C
PACD011001C2