Interface Adaptor For Other Air Conditioners (Cz-103Ap11P) - Panasonic Urban Multi MX1R Series Service Manual

Interface Adaptor
6.5

Interface Adaptor for Other Air Conditioners (CZ-103AP11P)

This optional accessory is a contact input/output interface adaptor for optional controllers for centralised
control and apparatus that cannot be directly connected to them. Connecting this optional accessory to an
optional controller for centralised control lets you turn the apparatus on/off by optional remote controller for
centralised control and monitor normal operation and malfunctions. This optional accessory can be
connected with a power consumption counting unit or data station.
6.5.1 Outline of System
6.5.2 Wiring
„ Setting of group No. for centralised control
„ ON output terminals (W1, W2) and OFF output terminals (W3, W4) are no voltage contact output.
Output for Control
„ Contact specifications are 2 A~1 mA for 220~240VAC, and 3 A~1 mA for 5~24 VDC.
Output mode changeover
switch SW3
Constant
Instantaneous
(ON): Instantaneous output of 1 second ON
„ An adaptor for wiring is required for remote control in order to receive output for control of wiring adaptor
610
Set from among 1~4 with setting switch RS1.
Set from among 0~9 and A~F with RS2.
Be careful not to duplicate a group No. of other apparatus when setting.
Instruction from optional controller for centralised control is ON.
Instruction from optional controller for centralised control is OFF.
Instruction from optional controller for centralised control is ON.
Instruction from optional controller for centralised control is OFF.
for other air conditioners such as ordinary air conditioner, etc.
PACD011001C2
Ry1 Ry2
ON OFF
OFF ON
(ON) OFF
OFF (ON)
Appendix