How To Install Wireless Remote Controller; Note - Panasonic S-M20PY3E Installation Instructions Manual

Change the value by pressing the
After changing all digits, press the
Step 5.
5 Select one of the Setting Data "YYYY" by pressing the
button.
* Setting data "YYYY"
Setting data
0000 Without separate setting
0001 Swing
0002 Move to position
0003 Move to position
0004 Move to position
0005 Move to position
0006 Move to position

NOTE

The flap swings during the operation under "Setting the Flap Separately".
At this time, the unselected flaps are moved to the position 1 .
After selecting "Set data", press the
from Fig. A.)
If you wish to change the selected indoor unit or finish setting, press the
display returns to Step 3).
6 If the button is pressed under the display Step 3, the
following display (Detailed setting-end screen) appears.
Then select "YES" by pressing the
the button.

8. HOW TO INSTALL WIRELESS REMOTE CONTROLLER

N OTE
Refer to the Installation Instructions attached to the optional Wireless Remote Controller.
Flap position during operation
and stay
1
and stay
2
and stay
3
and stay
4
and stay
5
or button.
button and proceed to
Flap position
3
4
5
button. (If setting continuously, follow the procedures
or button and press
46
000001 - XXXXXX
Set data
[ ]
or
000001 - XXXXXX
Set data
[ ] ]
1
2
button (the
Detailed settings
Exit detailed
Unit no.
and restart?
Code no.
Set data
[ ]
Code no.
0 0 0 0 X X
0001 0001
[ ]
Fig. C
Code no.
0 0 0 0 X X
YYYY 0001
[ ]
Confrm
Fig. D
1-1
settings
10
YES
0001 0001
NO
[ ]