Panasonic Urban Multi MX1R Series Service Manual page 638

PACD011001C2
Wiring to Central
Connect the BMS interface adaptor to connector No. CN2 of the central remote controller with the attached
Remote Controller wiring for transmission.
6.7.3 Wiring
Part Names and
Functions
External Control
Specifications of wiring for transmission
‹ 0.75~1.25 mm² sheathed vinyl cord or cable (double core), Max. length 150 m
Input (Wiring to
Host Computer
Monitor Panel, Etc.)
6.7.4 Control Input (Unified ON/OFF Control)
Wire as described below according to whether input is "voltage" or "no voltage."
Contact a Input for
Set the changeover switch (SS1) to "voltage."
Both Input A and B
(Factory set: Voltage)
(Voltage)
„ The black part shows the position of the switch.
Appendix
Interface Adaptor
617