How To Install The Timer Remote Controller Or High-Spec Wired Remote Controller; (Optional Part); Not E; Refer To The Installation Instructions Attached - Panasonic S-15MF3E5AN Installation Instructions Manual

6. HOW TO INSTALL THE TIMER REMOTE CONTROLLER
OR HIGH-SPEC WIRED REMOTE CONTROLLER

(OPTIONAL PART)

NOT E

Refer to the Installation Instructions attached to the optional Timer Remote Controller or optional
High-spec Wired Remote Controller.

7. HOW TO INSTALL WIRELESS REMOTE CONTROLLER

NOT E
Refer to the Installation Instructions attached to the optional Wireless Remote Controller.

8. PRECAUTIONS ON TEST RUN

● Request that the customer be present when the test run is performed. At this time, explain
the operation manual and have the customer perform the actual steps.
● Check that the 220 – 240 VAC power is not connected to the inter-unit control wiring
connector terminal.
* If 220 – 240 VAC is accidentally applied, the indoor unit control PCB fuse will blow in
order to protect the PCB. In this case, make the wiring correctly. Then disconnect the 2P
connectors (OC) that are connected to the indoor unit control PCB, and replace them with
2P connectors (EMG).
If operation is still not possible after changing the brown connectors, cut off the jumper on
the indoor unit control PCB.
(Be sure to turn the power OFF before performing this work.)
OC Jumper
(CN040, blue) (JP040)
EMG
(CN044, brown)
39