The One Time Feeder Change - Passap ELECTRONIC 8000 Operating Manual

Actions d u ri n g kn itting
The one time feede r c h a n g e
If you press the COL key, the display appears that a llows you to take a feeder of
your choice (that has not been allocated by the technique) once only into the cam
box.
• 1 t
FEEDER
F E E D E R 1
F E E D E R 2
F E E D E R
3
FEEDER
F E E D E R
�
FEEDER
First Line: one time feeder change
Here the feeder that is just knitting is
like to move into COLOR once in order to bring another
feeder (that has not been allocated by the technique) into the
cam box, overwrite this displayed number with the number of
the feeder you would like to move into the cam
Note: Of course you must bring the
in the color changer into the ready position. For further
information, see page
The selected feeder now remains in the cam box until the
technique calls for a color
(i.e. with a fairisle pattern with color change every second
row, the selected feeder remains in the cam box for only two
rows . )
At the next color change, the corresponding feeder is chosen
according to the program.
Note: here again you must make sure to first bring the
color changer into the ready position. For further
information, see page
(The other lines in this display refer to the allocation of feeder
functions described on the next page)
• 1 •
•2•
+ 3•
+
displayed.
correspond
1 9
ff.
change.
1 9
ff.
If you would
box.
ang feeder
91