Clr; Res - Passap ELECTRONIC 8000 Operating Manual

The key boa rd
34
E NT>
This key has the same function as the plain ENT key. It is
used to save what you have entered in the display.
In contrast to the plain ENT key, however, the display skips
to certain fields. This allows a faster programming when you
have gained enough experience to know that you do not
need the next display.
<<<
The 'Return' key goes back to the previous display without
altering or saving anything.
Note: if something has been typed in and you continue with
this key, this entry will not be saved!

CLR

This ' clear'-key deletes the current entry. When you see an
incorrectly entered digit, use this key to delete it while the
attendant input field is still flashing, (
If you have passed to another input field, use the cursor to
reactivate the required input field

RES

This 'reset'-key allows you to reset all 10 pattern sectors to
the default techniques.
(For 'default techniques' please refer to page 37 ).
Also the knitting width is reset to the specified value and
any programmed stop is deleted. The row counter is set
to 0
i.e. acitvated . )