Passap ELECTRONIC 8000 Operating Manual page 68

P rog ra m m i n g a pattern sector
ENT
66
The tech n iq u e
3 rd l i n e
This line shows you which technique has been loaded and
the origin.
If you wish to use a different technique, enter the technique
number. However, first enter the number for the origin of
this technique at the first input field beforehand.
Note: This process does not only overwrite and, thereby,
cancel the technique, but all patterns which were
programmed in this sector, will also be deleted.
Then press ENT.
If this technique can be used to knit a pattern, the following
display will appear. If not, the uchange v/"" display will
appear. Please refer to page 7 4.