Stop At The End Of The Row; Change Of Direction - Passap ELECTRONIC 8000 Operating Manual

The motor
26

Stop at the end of the row

You may a lways activate this key while the cam box is
moving. It will stop when it reaches the next edge stop
( If the cam box should move to the right into the color
changer, it stops before reaching the color
You may also activate this key when the cam box is not
yet moving. If you then press GO/STOP, the cam box will
knit one row and then stop.

Change of direction

This key can only be activated when the cam box is not
moving. When you press this key, the direction display
immediately shows the opposite direction. If you then
press the GO/STOP key, the cam box moves in the new
direction now being displayed.
It is necessary to press this key when the error message
"MOTOR BLOCKED
has crashed into one of the end stops due to a wrong
manipulation.
3205"
appears, because the motor
changer. )