E rror messages
4080, 408 1 ,
4082, 4083
4 1 2 3
41 40
4 1 73
41 81
1 52
MODULE ERROR
The defragmentation has not been possible. Unplug the
plug from the operating unit and plug it in again.
If the same error message appears again, replace your
module by another.
NOT ENOUGH SPACE
There is not enough space left in the module for the pat
tern you want to programme or to
terns and defragment the module. (See page 99)
N O DATA TRANSFERRED
The E 8000 has not received any data from the PC. Have
you pressed a random key on the PC ? If yes check whe
ther the connecting cable is plugged in properly.
WRONG CAM BOX POS.
The carriage was still moving while you pressed a key
that is not active in this
C H ECK M OTOR
The motor is switched off or the cable of the motor is not
plugged in.
If this is not the case the fuse might be broken. Unplug the
cable goint to the mains. There you will find a small dra
wer, that can be pulled out. Nearer to the motor is the ac
tive fuse, that might be broken. Nearer to you is a reserve
fuse. Push it sideways out of its holding and put it in the
place of the broken fuse.
save.
Delete some pat
situation.