Passap ELECTRONIC 8000 Operating Manual page 63

Kn itt i n g a patte rn sector
GO
STOP
" LX
LX
v
HANDLE DOWN
N E E DLES AND JACKS
GO
STOP
I n certain cases, when the new pattern has less colors than
the previous pattern, it might be that you can only prepare the
color changer two rows
Please refer to "Preparation of the color changer" on page
20.
When the color changer is ready,
press GO
to have the last row of the previous pattern knitted
Then the cam box setting for the new pattern sector will
appear.
Fol low the instruct1ons in the display and press GO/STOP to
kn1t the new pattern.
The following rule can be derived from the above descript1on
To be able to knit patte rn sector 1 to 9,
p ress the " K n itS" key two rows before the
desi red patte rn change.
If you forget to press the " KnitS" key two rows in
proceed according to the description given for the pattern
sector zero on page
( I . e. bring the color changer to the neutral position, press the
COL key and enter zero according to page 91 , set cam box
to SX/SX and carry out 2 rows as zero rows
later.
56.
advance,
6 1