Passap ELECTRONIC 8000 Operating Manual page 65

P rog ra m m i n g a pattern sector
ENT
2nd l i ne
Press help key to see available options:
1 == you can proceed with your own programming,
enter the number of the desired technique and, if
necessary, also the number of one or two patterns.
This is the default feature, I. e. when you have
entered the number of the desired pattern sector,
only press ENT if you wish to program the sector
yourself.
Continue reading on page
2 = MOD means that you wish to load a complete pattern
sector which you have stored on the module. Please also
read information on page 64.
Default means that you wish to update the technique
5
=
entered as a default feature for this
technique for the particular sector can be taken from
page 37).
If you then press ENT you return to the point where you
have pressed the ProgS key.
8 = continue means that you want to see this and a l l further
attendant displays without altering them. Please note: if
you have entered something new at an input field and
then select 8, you wil l receive a error message, telling
you that your entry will not be saved.
9 = You leave this area and return to the row
Help
PROGRAMM.
1
5 DEFAULT
8 CONTINUE
9 EXIT
65.
sector.
i.e. you
(The
information.
63