The Transition Rows - Passap ELECTRONIC 8000 Operating Manual

The auxiliary rows
The tra nsition rows
The transition rows are necessary in the following
situation:
You have completed a piece of knitting and would
like to start a new piece with a cast on without
having to repeat the pre-knitting rows.
With the assistance of the transition rows, the two
pieces of knitting can remain connected, so that
the rollers ensure continuous takedown. Only when
the new knitting is long enough can the two pieces
be separated from one another by cutting the last
transition row at the edge and pulling out the yarn
from this row.
There are pre-programmed knitting
TECHNIQUES for these transition rows.
The easiest case i s when you use the same needles
for the cast on of the new knitting as you used for
the end of the previous knitting
(Example: the previous knitting was completed with
double bed fairisle with all needles and the new
knitting begins with a cast on for KIK, likewise with
all needles. )
.
81