The Preparation Rows - Passap ELECTRONIC 8000 Operating Manual

Kn itt i n g a patte rn sector
The p reparation rows
The following display always appears after the START POSITION display
i.e. either directly afterwards if you have entered a row number other than zero
when switching on the machine,
or after you have entered the knitting width, if your absolute row counter reading is
zero.
It also appears if you have altered the knitting row with the RWS key during knitting
because you had, for instance, to unravel several rows. Please refer also to page
1 46.
A SX
v SX
N E E DLES A N D JAC KS
GO
STOP
56
These two preparation rows are
want to knit a new pattern. Rea
from left to right, the jacks are b
necessary for knitting the next r ow.
Set the pattern discs to S and
refer to page 1 1 ).
Set the color changer to Neut
key i n front of the empty feed
In the cam box. (Please refer t
Push into work position thos
comply with the knitting width e
please refer to page 1 4).
Start the motor by pressing t
Now the cam box moves to the
order to deposit the feeder, if th
Then the first preparation row is
cam box will stop at left, to allo
changer ready for the new patte
always necessary when you
son: as the cam box travels
rought into the position
the N-X levers to X. (Please
ral Position, press the black
er holder if there is a feeder
o page 20).
e needles and jacks which
ntered. (For work position
he GO/STOP key.
right into the color changer in
ere is one in the cam
performed after which the
w you to make the color
rn.
box.