Passap ELECTRONIC 8000 Operating Manual page 52

Kn itt i n g a pattern s ector
Once the cam box i s in START POSITION and this position has been
acknowledged by pressing the ENTER key, the machine is ready to knit. Now you
have direct access to all programming and knitting functions without having to follow
any particular order.
(Depending on whether you have entered a zero or any other row counter reading after switching on
the machine, the first display might give differing information. In any case you will have access to all
knitting and programming functions).
In the following section, we will start by explaining the knitting functions and turn to
the programming functions later.
1 . Beg i n n i n g a knitting piece when the row cou nter
reading is zero i n the zero pattern sector.
2 . Changing to another pattern sector.
3. Progra m m i n g the pattern sectors.
so
B