Reasons For A Color Sequence Change - Passap ELECTRONIC 8000 Operating Manual

P rog ra m m i n g a pattern sector
Reasons for a color seq uence c h ange
76
Adaptation to a previ ous piece of knitti n g :
You start your knitting with a one-color welt and have threaded
this color into the first feeder. However, here this color is not
displayed as first color but as third color.
In such a case we recommend to overwrite the 1 with the 3 and
1 .
the 3 with the
Note: Pay particular attention to the color sequence when
knitting :
Fa i risle patterns which do not repeat
conti nuously throughout the entire s u rface.
If you wish to take advantage of the possibility of repeating
your pattern in certain spacings, the program allows you to
control the color appearing between the
All TECHNIQUES are designed so that the first color will
always appear between the motifs.
Due to the fact that the program cannot distinguish between
the background color and the trimming color, it might be that
the first color is not the color which you wish to use as
background color.
In this case change the color sequence so that the background
color is displayed as the first
How does the ELECTRONIC determine, which is the color
sequence?
bottom left corner and goes on to read from left to right the
irst row of squares.
he first color, that the program "sees " appears as the first
color in the color sequence and so on.
Therefore it is possible that a color appears as the first color
though you dent see this color as your background color.
patterns.
color.