Programming A Single Stop - Passap ELECTRONIC 8000 Operating Manual

Actions d u ri n g kn itting
Prog ramm ing a s i ngle stop
If you would like to program a single stop during knitting, press the RWS key and
move the cursor to the second input field.
RWS
ROW COUNTER
STOP AT
ENT
PROG RA M M E D STO P
I n the second input field, you ca
(max. 9999). If you then press t
the position you were in when y
In the last row before the stop, t
show ">I" Stop at the end of t
=
ollowin dis Ia a
stopped, the f
This stop can also take place in a different pattern sector as
the one in which the programming of the stop is taking
Once the stop has been executed, you can enter a further
stop.
You can, however, never enter more than one stop at a time.
t 2 t
• o •
n type a random row number
he ENT key,
ou pressed the RWS button.
he row counter display will
he row. When the cam box has
g p y ppears:
you are back to
place.
89