Table of Contents
Advertisement
KNITTING INSTRUCTIONS
The meaning of the kn itti ng i nstructions
RAC KI N G >>>
RAC KI N G <<<
RAC KI N G <<<
WITHOUT YARN
N E E DLES AN D JAC KS
ACC O R D I N G TO
DIAGRAM
2 ROWS P REV.
PAT TE RN
44
This display means that the racking handle
must be turned in the direction of the arrow
(Arrow to the right = clockwise, arrow to the
left = counterclockwise)
Note:
direction of the lever, not to the direction to
which the needle bed is
1
The number in this display indicates the
number of handle turns which have to be
made. 1 /2 means half a handle turn (e.g.
from down to up).
This instruction appears when the zero rows
have to be knitted. Move the cam box into the
color changer in order to expel the feeder that
was in the cam box. To be able to carry out 2
zero rows without feeder, do not take a new
feeder into the cam box.
To avoid any other feeder from being taken
over by the cam box, set the color changer
to the neutral position by pressing the
button underneath the color changer.
Please refer to page 1 9
This display appears together with the one
mentioned above. It means that, depending
on the TECHNIQUE you wish to knit, all or
only some needles and jacks have to be
brought into work position. Pages 1 00 to 145
contain a description of all techniques stored
permanently in the memory, including the
corresponding needle diagrams.
This display informs you, when changing to a
new pattern sector, that another 2 rows of the
previous pattern have to be knitted while
preparations for the new pattern are already
being made. Press GO to continue knitting.
The display always refers to the turning
moved.
ft.
Advertisement
Table of Contents
