Passap ELECTRONIC 8000 Operating Manual page 70

P rog ra m m i n g a pattern sector
ENT
ON THE PC
S E LECT
" KN I T A PATIERN"
ENT
68
F ront bed pattern
3rd l i ne
Help if you have
�elected ROM:
�vailable patterns
If you wish to program a pattern, first enter the number of the
pattern origin in the previous input field followed by the
number of the pattern in this input field.
If your pattern comes from the PC ,
number of the pattern can only be from 3000 to 6999. ( It
does not have to be the same number as in the
After ENTthe following display will appear:
When the PC is ready, it will tell you, to press ENT on the
ELECTRONIC 8000.
Do so and then press a random key on the PC.
The display will tell you, that the pattern is being transferred.
When the transmission is completed, the next display
appears.
(Remember to plug the cable that comes from the PC into the
middle socket of the control unit . )
the
PC. )