Passap ELECTRONIC 8000 Operating Manual page 82

The a u x i l ia ry rows
S ECTOR PROGR.
+ S t D E FAULT
-
S ECTOR
D E FA U LT
ENT
A SX
SX
V
N E E DLES A N D JAC KS
80
+ o o o o +
Enter zero in the first input field.
Enter 5 for " default " in the second input field.
Press ENT.
Now first the inquiry for the knitting width appears and then
the display for the two preparation rows.
Follow the instructions and continue knitting
CAST ON has been displayed.
It is most important that you use the strippers for the pre­
knitting rows. ( Refer to page 1 1 )
It is recommended to use a large stitch size so that the
knitting increases faster and less material is used.
At approximately 200 rows the knitting should be long enough
to squeeze it between the takedown roller and the pressure
rollers. (See page 27).
Recommendation: when about half of the pre-knitting rows
have been knitted, release the stitches from the front bed and
unravel. This will allow you to attain to the desired length
faster while at the same time requiring less material.
•o•
1 : 1
after END