Table of Contents
Advertisement
The color c h a n g e r
The feeder allocation
The required feeders are allocated by the
ELCTRONIC. Basically, the following rules
1 -color pattern :
2-color pattern:
3-color pattern :
4-color pattern:
Which color must be threaded into which feeder is
displayed, the first time during programming of the
pattern (page 75) and a second time just before
starting to knit the corresponding pattern sector
The colors are always knitted in the
corresponding order from left to right.
Before beginning, the color changer must be
set in such a way as to enable the
corresponding feeders to be taken over by the
cam box in the proper order.
If you set up the color changer incorrectly so that
the cam box does not take over the feeders
allocated by the machine, the cam box will stop
and an error message wil l appear (see page 1
(Under certain circumstances, e.g. when a feeder
holder is defective, it might be necessary to
change the automatically set feeder allocation,
see page 92).
first feeder from the left
first and second feeders
from the left
first, second and third
feeders from the left
first, second, third and
fourth feeders from the
left
apply:
48).
2 1
Advertisement
Table of Contents
